REPRESENTATIVES

 
NORWAY, SWEDEN, DENMARK, NETHERLANDS, GERMANY, U.K., ITALY
AMFLOW® NORGE   
Prinsens vei 12
4315 Sandnes
Norway

Phone:   +47.922.19.656
Fax:   +47.520.00.591
 Email:   leif.egil.pettersen@amflow.no

 

MALAYSIA, INDONESIA, SINGAPORE, INDIA, THAILAND, VIETNAM
AMFLOW CONTROLS ASIA SDN BHD   
No. 1701, Block 1, TTDI ADINA
Jalan Judo 13/45, Seksyen 13
40675 Shah Alam, Selangor
Malaysia

Phone:   (+603) 5523.8418
Mobil:   (+6012) 3323.118
 Email:   amflowcontrols@gmail.com

 

  

NIGERIA
SUDIFLOW INTERGRATED SERVICES, LTD   
25 Elelenwo Road
Port Harcourt, Nigeria

Phone:   +234.803.309.1405
+705.679.4894
 Email:   sudiflow@yahoo.com

 

AMFLOW® AM7B-SSSP FLOW CONTROL VALVE



AM7B-SSSP Flow Control Valve
OVERVIEW

AM7B-SSSP Sub-Sea Flow Control Valves provide maintenance-free remote chemical injection in sub-sea applications at operating depths of up to 4000m (13,000 ft).  Featuring a similar design to our best-selling AM7B, the AM7B-SSSP operates in a flow range of 0.09 LPH to 150 LPH.   Minimum flow rates below 0.09 LPH are available as a special order.  The dual jet design regulates operating pressure between 20-bar (300 PSI) and 690-bar (10,000 PSI), and self-compensates for pressure fluctuations to maintain consistent flow rates.

Our self-regulating Dual Piston technology provides reliable metering across a wide range of chemicals. Flow control is set by the internal pressure of the sub-sea valve and not overall system pressure, allowing for minimal operating torque for flow adjustment and easy adaptation to automation.

 

SPECIFICATIONS 

Design Features

  • Low Maintenance
  • 40:1 at 10-bar ∆p turndown ratio
  • Maximum panel thickness: 7mm (0.28”)
  • Mounting hole diameter: 35mm (1.38”)
  • Low torque requirements for adjustment
  • Environmentally Sealed

Mechanical Features

  • Construction:  316L Stainless Steel
  • Components:  Ceramic for high pressure control
  • Inlet & Outlet Ports:  SF375CX (use with 3/8" tube)
  • Purge Port:  1/4" BSPP (plugged)
  • Seals:  FFKM & PTFE
  • Weight: 3.9 kg (8.6 lbs) 

Operating Environment

  • Operating Temperature: -15oC to 200oC  (5oF to 392oF)
  • ATEX 2 G Ex d T3

Certification

  • Certification of material type and condition, and all post process, including anodizing, heat treatment, plating, and all chemical processes, will be maintained on file with A & H Enterprises, Inc. for a period of not less than five years.
 Standard Minimum H2OStandard Maximum H2O
Flow*  0.09 LPH  150 LPH
Operating Pressure**  20-bar (300 PSI)  690-bar (10,000 PSI)
Hydrostatic Pressure Test    1034-bar (15,000 PSI)
Turndown Ratio***    40:1 at 10-bar ∆p


    * Depending on characteristics of the media
  ** Inlet Pressure.  Minimum recommended pressure supplied by pump to valve 
*** Turndown ratio can vary dependent upon chemical composition, flow rate, and ∆p