REPRESENTATIVES

 
NORWAY, SWEDEN, DENMARK, NETHERLANDS, GERMANY, U.K., ITALY
AMFLOW® NORGE   
Prinsens vei 12
4315 Sandnes
Norway

Phone:   +47.922.19.656
Fax:   +47.520.00.591
 Email:   leif.egil.pettersen@amflow.no

 

MALAYSIA, INDONESIA, SINGAPORE, INDIA, THAILAND, VIETNAM
AMFLOW CONTROLS ASIA SDN BHD   
No. 1701, Block 1, TTDI ADINA
Jalan Judo 13/45, Seksyen 13
40675 Shah Alam, Selangor
Malaysia

Phone:   (+603) 5523.8418
Mobil:   (+6012) 3323.118
 Email:   amflowcontrols@gmail.com

 

  

NIGERIA
SUDIFLOW INTERGRATED SERVICES, LTD   
25 Elelenwo Road
Port Harcourt, Nigeria

Phone:   +234.803.309.1405
+705.679.4894
 Email:   sudiflow@yahoo.com

 

AMFLOW® AM12A FLOW CONTROL VALVE


OVERVIEW

The AM12A is similiar in design and construction as the AM8C but
with a higher flow rate of 120 LPH to 1200 LPH which makes it suitable
for chemical injection applicatons using Menthanol.  This self-regulated
design provides a standard turndown ratio of up to 10:1, with repeatablity
and accuracy within  ± 3% full range.  The AM12A may be combined with
any of Amflow's Electronic Actuators. 

 

SPECIFICATIONS

Design Features

  • Low Maintenance
  • 10:1 turndown ratio 
  • Maximum panel thickness: 7mm (0.28”)
  • Mounting hole diameter: 35mm (1.38”)
  • Low torque requirements for adjustment 
  • Environmentally Sealed

Mechanical Features

  • Construction 316L Stainless Steel 
  • Componenets:  Ceramic for high pressure control
  • Inlet & Outlet Ports:  1/2" FBSPP
  • Purge Port:  1/8" BSPP
  • Seals:  FFKM & PTFE
  • Weight: 6.8 kg (15 lbs)

Operating Environment

  • Operating Temperature: -15oC to 200oC  (5oF to 392oF)
  • ATEX 2 G Ex d T3

Certification

  • Certification of material type and condition, and all post process, including anodizing, heat treatment, plating, and all chemical processes, will be maintained on file with A & H Enterprises, Inc. for a period of not less than five years.
 Standard
Minimum H2O
Standard
Maximum H2O
Flow* 120 LPH 1200 LPH
Flow* with Methanol 120 LPH 1370 LPH
Operating Pressure**  20-bar (300 PSI) 414-bar (6,000 PSI)
Hydrostatic Pressure Test 620-bar
(9,000 PSI)
Turndown Ratio up to
10:1
 


    * Depending on characteristics of the media
  ** Inlet Pressure.  Minimum recommended pressure supplied by pump to valve 
*** Turndown Ratio can vary dependent upon chemical composition, flow rate, and ∆p