REPRESENTATIVES

 
NORWAY, SWEDEN, DENMARK, NETHERLANDS, GERMANY, U.K., ITALY
AMFLOW® NORGE   
Prinsens vei 12
4315 Sandnes
Norway

Phone:   +47.922.19.656
Fax:   +47.520.00.591
 Email:   leif.egil.pettersen@amflow.no

 

MALAYSIA, INDONESIA, SINGAPORE, INDIA, THAILAND, VIETNAM
AMFLOW CONTROLS ASIA SDN BHD   
No. 1701, Block 1, TTDI ADINA
Jalan Judo 13/45, Seksyen 13
40675 Shah Alam, Selangor
Malaysia

Phone:   (+603) 5523.8418
Mobil:   (+6012) 3323.118
 Email:   amflowcontrols@gmail.com

 

  

NIGERIA
SUDIFLOW INTERGRATED SERVICES, LTD   
25 Elelenwo Road
Port Harcourt, Nigeria

Phone:   +234.803.309.1405
+705.679.4894
 Email:   sudiflow@yahoo.com

 

AMFLOW® AM9A FLOW CONTROL VALVE



AM9A Flow Control Valve
OVERVIEW

For chemical injection applications requiring a range of flow rates from 120 LPH up to 1200 LPH, the ATEX-certified AM9A Flow Control Valves features our patented Dual Piston technology. The AM9A is pressure independent for reliable metering across a wide range of chemicals. This self-regulated design provides a standard turndown ratio up to 10:1, with repeatability and accuracy within ± 3% full range.  The AM9A is able to pass 1.00mm particles, making it suitable for chemical injection applications with some debris in the process line.  

SPECIFICATIONS

Design Features

  • Low Maintenance
  • 10:1 turndown ratio 
  • Maximum panel thickness: 7mm (0.28”)
  • Mounting hole diameter: 46mm (1.8”)
  • Low torque requirements for adjustment 
  • Environmentally Sealed

Mechanical Features

  • Construction:  Duplex 2205
  • Components:  Ceramic for high pressure control
  • Standard:  Inlet & Outlet Ports: SF 750 CX
  • Standard Purge Port:  SF 250 CX
  • Seals:  FFKM & PTFE Seals
  • Weight: 13.61 kg (30 lbs)

Operating Environment

  • Operating Temperature: -15oC to 200oC  (5oF to 392oF)
  • ATEX 2 G Ex d T3

Certification

  • Certification of material type and condition, and all post process, including anodizing, heat treatment, plating, and all chemical processes, will be maintained on file with A & H Enterprises, Inc. for a period of not less than five years.
 Standard
Minimum H2O
Standard
Maximum H2O
Flow*  120 LPH 1200 LPH
Flow* with Methanol  120 LPH 1370 LPH
Operating Pressure**  20-bar (300 PSI) 827-bar (11,995 PSI)
Hydrostatic Pressure Test 1241-bar
(17,995 PSI) 
1380-bar
(20,000 PSI) 
Turndown Ratio *** 1396-bar
(20,250 PSI)


    * Depending on characteristics of the media
  ** Inlet Pressure.  Minimum recommended pressure supplied by pump to valve 
*** Turndown Ratio can vary dependent upon chemical composition, flow rate, and ∆p