REPRESENTATIVES

 
NORWAY, SWEDEN, DENMARK, NETHERLANDS, GERMANY, U.K., ITALY
AMFLOW® NORGE   
Prinsens vei 12
4315 Sandnes
Norway

Phone:   +47.922.19.656
Fax:   +47.520.00.591
 Email:   leif.egil.pettersen@amflow.no

 

MALAYSIA, INDONESIA, SINGAPORE, INDIA, THAILAND, VIETNAM
AMFLOW CONTROLS ASIA SDN BHD   
No. 1701, Block 1, TTDI ADINA
Jalan Judo 13/45, Seksyen 13
40675 Shah Alam, Selangor
Malaysia

Phone:   (+603) 5523.8418
Mobil:   (+6012) 3323.118
 Email:   amflowcontrols@gmail.com

 

  

NIGERIA
SUDIFLOW INTERGRATED SERVICES, LTD   
25 Elelenwo Road
Port Harcourt, Nigeria

Phone:   +234.803.309.1405
+705.679.4894
 Email:   sudiflow@yahoo.com

 

AMFLOW® AM11A FLOW CONTROL VALVE



AM11A Flow Control Valve
OVERVIEW

The AM11A Flow Control Valve operates in a flow range of 0.09 LPH to 150 LPH and allows for a greater operating pressure range from 20-bar (300 PSI) to 920-bar (13,340 PSI). As with all of Amflow's® Flow Control Valves, the AM11A self-compensates for pressure fluctuations to maintain consistent flow rates.  The AM11A may be used with either Amflow's® Electronic Valve Actuators' for remote operation. 

 

 

Specifications

Design Features

  • Low Maintenance
  • 40:1 at 10-bar ∆p turndown ratio
  • Maximum panel thickness: 7mm (0.28”)
  • Mounting hole diameter: 35mm (1.38”)
  • Low torque requirements for adjustment
  • Environmentally Sealed

Mechanical Features

  • Construction:  316L Stainless Steel Construction
  • Components:  Ceramic for high pressure control
  • Inlet & Outlet Ports:  SF562CX (use with 9/16 tube)
  • Purge Port:  SF562CX (use with 9/16 tube)
  • Seals:  FFKM & PTFE
  • Bolts:  Inconeal
  • Weight: 5.9 kg (13 lbs)

Operating Environment

  • Operating Temperature: -15oC to 200oC  (5oF to 392oF)
  • ATEX 2 G Ex d T3

Certification

  • Certification of material type and condition, and all post process, including anodizing, heat treatment, plating, and all chemical processes, will be maintained on file with A & H Enterprises, Inc. for a period of not less than five years.
 Standard
Minimum H2O
Standard
Maximum H2O
Flow*  0.09 LPH 150 LPH
Operating Pressure**  20-bar (300 PSI) 920-bar (13,340 PSI)
Hydrostatic Pressure Test 1380-bar
(20,000 PSI)
Turndown Ratio up to
40:1 at 10-bar ∆p 


    * Depending on characteristics of the media
  ** Inlet Pressure.  Minimum recommended pressure supplied by pump to valve 
*** Turndown ratio can vary dependent upon chemical composition, flow rate, and ∆p